Screw Juicer for Fruits
The main component of this equipment is the spiral. The bottom
diameter of the spiral gradually increases and the pitch gradually
decreases along the direction of the slag outlet. When the material
is pushed by the spiral, the volume of the spiral cavity is
reduced, forming a squeeze on the material.
The direction of rotation of the spiral main shaft is clockwise
when viewed from the feed hopper to the slag trough. The fruits are
added to the feed hopper and are pressed by the screw. The squeezed
juice flows into the juice container at the bottom through the
filter, while the waste is discharged through the gap formed
between the screw and the tapered part of the pressure regulating
head.
The size of the gap can be adjusted by the axial movement of the
pressure regulating head. When the hand wheel bearing seat is
transferred clockwise by hand (from the slag trough of the
equipment to the feed hopper), the pressure regulating head moves
to the left, and the gap is reduced, otherwise the gap becomes
larger. Changing the size of the gap, that is, adjusting the
resistance of the slag discharge, can change the juice discharge
rate.
However, if the gap is too small, under strong extrusion, some slag
particles will be squeezed out together with the juice through the
filter. Although the juice output increases, the quality of the
juice is relatively reduced. The size of the gap should be
determined according to the specific process requirements of the
user.
Technical Parameters:
| Capacity | 500L/H |
| Driven Type | Electric |
| Product Name | Screw Juicer |
| Automatic Grade | Automatic |
| Application | Fruit Juice Pulp Processing |
| Feature | High Efficiency High Hygiene Easy Operate |
| Material | Food Grade Stainless Steel |
Applications:
1. Site service support such as installationcommissioningtraining
2. Online operation support
3. Spares
